Vinyl Mesh Banners

We can produce your Vinyl Mesh Banner order in as little as 24 hours from artwork proof sign off: < inc GST - 24 hours (1 working day) after artwork proof sign off < inc GST - 48 hours (2 working days) after artwork proof sign off < inc GST - 3 working days after artwork proof sign off and receipt of 30% deposit if over inc GST < inc GST - 4 working days after artwork proof sign off and receipt of 30% deposit < inc GST - 5 working days after artwork proof sign off and receipt of 30% deposit < inc GST - 6 working days after artwork proof sign off and receipt of 30% deposit

Clear eyelets are the latest in eyelet technology. The old metal eyelets would block the graphic on your sign and be very noticeable - but you can see straight through the clear eyelets. This allows you to see more of your graphic on the sign as the clear eyelets are barely noticeable. The clear eyelets are also just as strong as the metal eyelets but will not rust. The signs look significantly better with the clear eyelets.

Vinyl Mesh Banners up to 2000mm high are finished with folded and welded edges and eyelets placed every 500mm along the perimeter.

We manufacture the Vinyl Mesh Banners with a maximum height of 2000mm. We can supply any width required although we limit the size of each banner to 10 metres width. Banners wider than 10 metres are split (i.e. a 20 metre wide banner will be supplied in 2 x 10 metre widths) and are designed to be installed next to each other so they look like one large banner. This 10 metre maximum width also makes installation much easier as larger banners are much more difficult to handle.

Our Vinyl Mesh Banner material is a strong 250gsm, 12 x 12 thread material.

If it is a normal construction fence we suggest that the easiest method is cable ties through the eyelets. We supply the banners with eyelets every metre along the top and bottom.

Due to the heat produced during our Latex printing process, the final banner size can vary up to approx. 2% from what is ordered. As such, we don’t advise Vinyl Mesh Banners to be printed with measurements on them as these will not be 100% accurate, unfortunately. Our banners are also not recommended if you need to fit them into an existing frame or use specific eyelet locations, as the size may be slightly out due to the heating process.

Yes, our price includes the set up cost for 1 design only. If you have multiple designs for the same size you will still get the lower bulk price, however there is a small multiple artwork charge applied for each additional design to cover our extra set up costs. Simply enter the total number of signs required and then the total number of designs into the pricing calculator above - and it will work out an accurate price for you.

You will need to measure the fence to be sure, however the most common height ordered is 1600mm.

We recommend that any QR codes added to the artwork are at least 150mm x 150mm in size. If you provide a QR code smaller than this, there is a chance it will not work due the perforations in the material.