Vinyl Banners

We do not offer banners finished with keder edging (for use with aluminium sailtrack)

We only manufacture single sided banners (banners with printing on one side). The reverse side is black.

If your Vinyl Banner is used indoors, it will last for years! Any vinyl outdoors will deteriorate based on how much UV exposure it receives. We estimate at least 12 months for full time outdoor use.

Due to the heat produced during our Latex printing process, the final banner size can vary up to approx. 2% from what is ordered. As such, we don’t advise Vinyl Banners to be printed with measurements on them as these will not be 100% accurate, unfortunately. Our Vinyl Banners are also not recommended if you need to fit them into an existing frame or use specific eyelet locations, as the size may be slightly out due to the heating process.

Clear eyelets are the latest in eyelet technology. The old metal eyelets would block the graphic on your sign and be very noticeable - but you can see straight through the clear eyelets. This allows you to see more of your graphic on the sign as the clear eyelets are barely noticeable. The clear eyelets are also just as strong as the metal eyelets but will not rust. The signs look significantly better with the clear eyelets.

We manufacture the Vinyl Banners with a maximum height of 2100mm (this is reduced to 2050mm H if supplied with rod pockets on top and bottom). We can supply any width required although we limit the size of each banner to 10 metres width. Banners wider than 10 metres are split (i.e. a 20 metre wide banner will be supplied in 2 x 10 metre widths) and are designed to be installed next to each other so they look like one large banner. If both sides are over the maximum height, then your banner will need to be split into multiple pieces and we cannot guarantee that these multiple banners will line up perfectly when split.

We can produce your Vinyl Banner order in as little as 24 hours from artwork proof sign off: < inc GST - 24 hours (1 working day) after artwork proof sign off < inc GST - 48 hours (2 working days) after artwork proof sign off < inc GST - 3 working days after artwork proof sign off and receipt of 30% deposit if over inc GST < inc GST - 4 working days after artwork proof sign off and receipt of 30% deposit < inc GST - 5 working days after artwork proof sign off and receipt of 30% deposit < inc GST - 6 working days after artwork proof sign off and receipt of 30% deposit

Our banner material is white and has a matte finish. The ink has a satin finish so any printed areas of the banner will have this finish.

We recommend that a maximum 40mm diameter pole be used with the 75mm lay flat rod pockets.

Yes, our price includes the set up cost for 1 design only. If you have multiple designs for the same size you will still get the lower bulk price, however there is a small multiple artwork charge applied for each additional design to cover our extra set up costs. Simply enter the total number of signs required and then the total number of designs into the pricing calculator above - and it will work out an accurate price for you.