3D Letters

We can produce your order in as little as 24 hours after artwork proof sign off: < inc GST - 24 hours (1 working day) after artwork proof sign off < inc GST - 48 Hours (2 working days) after artwork proof sign off < inc GST - 3 working days after artwork proof sign off < inc GST - 4 working days after artwork proof sign off and receipt of deposit

These are 2 completely different methods of cutting. Laser cutting can provide a smoother edge finish and sharper cuts than the CNC router. This is mainly noticeable on smaller sizes - which is one of the reasons we only supply larger router cut 3D letters.

As we use the router to cut ACP, it doesn’t have the ability to cut the backing tape as effectively as the Laser Cutter can. We also find that ACP is more likely to be used outdoors and the 3M tape isn’t as suitable for that application when compared to something stronger (e.g. silicone or liquid nails).

yes - both the Acrylic and Aluminium Composite Panel (ACP) materials are weather resistant and suitable for use on external applications.

At this stage we only offer the colours stated on the web page. However please advise our Customer Happiness Team of the colour you require - as we are always looking to add other colours to our range where possible. Your feedback would be appreciated.

We only offer the standard colours stated on the web site at the moment. We do not offer other colours or painted letters.

Firstly you will need to determine if the surface you are applying the letters to is suitable for this product.​ We would also recommend that the best way to install the letters is to contact a professional sign installer. However if you wish to save money and install the letters yourself, here is a basic guide to the process: 1. Ensure the wall surface is clean and free of any dust or dirt 2. Place the installation stencil onto the wall and use a tape measure and level to ensure it is positioned correctly. Secure it to the wall using masking tape. 3. Take each 3D letter and peel the backing off the tape on the back of the letter (where applicable). Larger letters may need an adhesive such as Liquid Nails or Silicone applied to the centre of the letters. Place it in the correct spot in the installation stencil and press it very hard onto the wall. It should now remain in place. Continue until all letters are attached. 4. Remove the installation stencil from the wall.

​The maximum width that we can achieve in one piece is 2400mm W (1200mm W for 20mm Acrylic). As the letters are supplied individually, this is only a concern for cursive fonts where the letters join together and therefore are supplied as one large piece, or for large logos that are joined. For these orders where the total width exceeds the max size, the letters will be supplied in multiple panels and are able to be joined near-seamlessly when installed.

​The stencil is made from Yupo which is a tear resistant, water resistant 200 gsm synthetic paper.